Full Normal Patchbays - Normalling patchbays
A fully-normalled patchbay configuration is used to create a connection between two devices while leaving a point of entry for interception from another device.
Without an interception, two devices are connected directly, without the need for a third patch cable for each direct connection. This can quickly clean up a lot of clutter as your setup grows.
With an interception, another device can be quickly inserted into the signal chain. For example, a compressor can quickly be inserted between a console and a computer running Pro Tools just by connecting the compressor to the output of the console and the input of the computer.
Subscribe to our newsletter and always be the first to hear about what is happening.
© 2021 Bittree