968 (Original) Programming Instructions

 

How to Change the Programming for a Circuit on a 968 (Original) Series Patchbay:

  1. Remove the top dust cover to expose the programming shunts.
  2. Find your desired configuration in the diagram above (a larger image is available in the downloadable instructions).
  3. Arrange the programming shunts to match the appropriate diagram.  Note: Each circuit can be programmed independently.
  4. Ample shunts are provided with every programmable patchbay.  All shunts should be placed vertically.  Red shunts are used for grounding options.  White shunts (shown as light gray above) are used for normaling options.
  5. Replace the dust cover.

 

Download Instructions