968-S (Mono and Stereo Spaced) Programming Instructions


How to Change the Programming for a Circuit on a 968-S (Mono and Stereo Spaced) Patchbay:

  1. Remove the top dust cover to expose the programming shunts.
  2. Find your desired configuration in the diagram above (a larger image is available in the downloadable instructions).
  3. Arrange the programming shunts to match the appropriate diagram.  Note: Each circuit can be programmed independently.
  4. Ample shunts are provided with every programmable patchbay.  
  5. Replace the dust cover.


Download Instructions