Catalog Index > 968 Series Programmable Audio Patchbays > 968 Series Programming Instructions

We're pleased to provide online programming instructions for all audio patchbays.



Below are instructions for the 968 Series of Programmable audio patchbays. If you need additional help, click on our Email Form under Technical Support, or call a Bittree Sales Consultant toll-free at (800) 500-8142.





How to Change the Programming for a Circuit:



1. Remove the top dust cover to expose the programming shunts.

2. Find your desired configuration in the chart above.

3. Arrange the programming shunts to match the appropriate diagram.

Note: Each circuit can be programmed independently.

4. All shunts should be placed vertically. Red shunts are used for normaling options. White shunts (shown as green above) are used for grounding options.

5. Replace the dust cover.