Catalog Index > Video Mini-WECO Component Patchbays > RGB

 RGB Overview
Product Overview

Bittree Mini-WECO video jacks offer a small-format, high-density version of our standard video jacks, and feature a 75-ohm high-frequency and BNC rear interface. Bittree video jacks are designed for exceptional performance in conventional analog applications such as monitor routing, primary routing, re-routing, router backup and video distribution, as well as in high bit-rate applications such as HDTV, SDI, AES and high-resolution computer graphics.
Jack Features
30,000 minimum insertion cycles
True 75ohm impedance with low return loss
High-bandwidth performance
Jacks conform to SMPTE 259M and SMPTE 292M
BNC rear interface
Jacks rated from DC to 3 GHz
Available in terminated or non-terminated configurations

 Four Different Jack Types to Choose From

Normalled/
Terminated
Normalled/
Non-Terminated
Non-Normalled/
Terminated
Non-Normalled/
Non-Terminated
Signal flows through jack in un-patched state. When a patchcord is inserted, the signal path follows the patchcord, and the opposite side of the jack is terminated with a 75 Ohm resister. Signal flows through jack in un-patched state. When a patchcord is inserted, the signal path follows the patchcord. Features a single patch-point. With patchcord inserted, circuit follows patchcord. When patchcord is removed, circuit is terminated with a 75 Ohm resister. Features a single patch-point. With patchcord inserted, circuit follows patchcord.

 Product Part Numbers
 

swbrgb20tf.jpg

Description Non-Normal /
Non-Terminating

Non-Normal /
Terminating

Full-Normal /
Non-Terminating

Full-Normal /
Terminating

2x10, 2RU, Black BRGB20T-1MN
BRGB20T-1MT
BRGB20T-2MN
BRGB20T-2MT
2x10, 2RU, Gray GRGB20T-1MN
GRGB20T-1MT
GRGB20T-2MN
GRGB20T-2MT




Bittree Customer Service: 1-800-500-8142 (U.S. only) or 1-818-500-8142 (outside U.S.) Email cs@bittree.com. © Bittree, Inc. All rights reserved. Webmaster.