|
Catalog Index > 961 Series Classic Audio Patchbays
| 961 Series Classic Audio Patchbays |
2x48, 2 RU Black Audio Bantam (TT) Patchbay
Our 961 Series features our classic, non-programmable audio patchbays.
With a jack configuration of 2x48, the 961 Series comes with the most options of any audio patchbay, including rear panel configurations, normals, grounds, stereo spacing, panel color and rack-unit height.
All Bittree audio patchbays bring you enhanced studio versatility and instant signal re-routing, and are perfect for master control and central switching I/O, audio console I/O, recording devices I/O, and audio routing switcher bypass and input rerouting.
Our audio patchbays are built to AES/EBU specifications, and are internally wired with low-capacitance, shielded, 110-ohm twisted pairs. The low-capacitance characteristics make them ideal for both analog as well as digital applications.
Patchbays used for digital applications are typically full-normaled or non-normaled, since it is necessary to provide a single 110-ohm load for each source. This feature also ensures prevention of impedance mismatches, improper loading, multiple connections, and double termination.
|
Features
|
 |
Jacks rated to 30,000 minimum insertion cycles |
|
Copper-nickel-silver alloy leaf springs with gold-plated cross bar switching contacts and nickel-plated sleeve bushings |
|
Precision-stamped reinforced steel jack frame |
|
Gold-plated contacts used in E3 and E90 rear interface |
|
Wired with low-capacitance, AES/EBU-rated shielded, twisted pair |
|
Large user-friendly designation strips |
|
Panels made from 3/16" solid aluminum with a durable powder-coat finish |
|
Mating connectors, contacts and normals (where applicable) are included with all standard rear interfaces |
|
|
Options
|
|
Available in 1, 1.5 or 2 rack units (RU) |
|
Fully enclosed chassis available in 7" or 12" depth |
|
Harness available as a 48" standard, or custom length |
|
Wide range of rear interfaces available, including E3, E90, ID (punchdown), E56, DB25 and others |
|
Normals can be pre-programmed to full-normal, half-normal or non-normal |
|
Normals looped internally or brought out to the rear interface |
|
Grounding can be pre-programmed to bussed, isolated, looped or switched |
|
Mono or stereo jack spacing |
|
Over/under or over/over designation strips |
|
Black or gray front panel |
|
|
|
| Go to Product Builder |
|
Use this product as a starting point in the Product Builder or start from scratch by selecting Audio, Video or Data.
|
|
| Patchcords |
| |
|
|
Audio Bantam (TT) Patchcords
Colors
Black
Red
Yellow
Green
Blue
Purple
|
|
Length
24" / 61 cm
36" / 92 cm
48" / 122 cm
60" / 153 cm
72" / 184 cm
|
|
| |
|
|
Dual Audio Bantam (TT) Patchcords
Colors
Black
Red
Yellow
Green
Blue
Purple
|
|
Length
24" / 61 cm
36" / 92 cm
48" / 122 cm
60" / 153 cm
72" / 184 cm
|
|
|
| Audio 961 Series, Product Number Matrix |
|
