Catalog Index > Video WECO Component Patchbays

 Video WECO Component Patchbays

Video WECO Component Patchbays

2x8, 2 RU Black WECO Component Patchbay

 Overview

Our standard Video Patchbay for RGB, RGBS and RGBHV, with 75-ohm high-frequency jacks and a BNC rear interface. Bittree video patching systems are designed for exceptional performance in conventional analog applications such as monitor routing, primary routing, re-routing, router backup and video distribution, as well as in high bit-rate applications such as HDTV, SDI, AES and high-resolution computer graphics.



All component patchbays are available either normalled or non-normalled, and terminating or non-terminating.



For maximum flexibility, we produce video patchbays conforming to both the WECO and Mini-WECO 75 Ohm standard.



WECO vs. Mini-WECO: Most video patching systems in the U.S. use the WECO standard. WECO standards were developed by the Western Electric Company decades ago. WECO is perfectly suited for high-bandwidth applications, while Mini-WECO is designed for the highest-bandwidth applications.

Features
30,000 minimum insertion cycles
True 75 Ohm impedance with low return loss
High-bandwidth performance up to 3GHz
Jacks conform to SMPTE 259M and SMPTE 292M
BNC rear interface
Panels made from 3/16” solid aluminum
Durable powder-coat finish
Jacks are isolated from the panel
Extra-wide designation strips
The center RGB circuit is offset to ensure correct patchcord insertion
SVHS video can be patched using two patchpoints and a TCS-418 adaptor on the rear BNC interface
3-circuit, 4-circuit and 5-circuit patchcords are available for RGB, RGBS, and RGBHV
Options
Composite video jack count may be specified as one or two rows of 24, 26 or 28
For higher density some component video patchbays come in a vertical configuration
Available in 1, 1.5 or 2 rack units (RU)
Black or gray front panel
Jacks may be ordered in four different configurations:
  Normalled / Terminated
  Normalled / Non-Terminated
  Non-Normalled / Terminated
  Non-Normalled / Non-Terminated

 Go to Product Builder
Use this product as a starting point in the Product Builder or start from scratch by selecting Audio, Video or Data.
 Go to Product Numbers
Click to view frequently requested Product Numbers for this patchbay.
RGB
RGBHV
RGBS

 Accessories


BNC Extraction Tool, 12"

BNC to WECO Patch

 Patchcords
 
WECO Component Patchcord
Colors
 Black
 
 
Length
 24" / 61 cm
 36" / 92 cm
 48" / 122 cm
 60" / 153 cm
 72" / 184 cm

 Video WECO Component, Product Number Matrix


Bittree Customer Service: 1-800-500-8142 (U.S. only) or 1-818-500-8142 (outside U.S.) Email cs@bittree.com. © Bittree, Inc. All rights reserved. Webmaster.